Saturday, November 8, 2014

Soy Wax Emergency Candles

Last weekend the four of us got together for our annual "Girls' Getaway." It was sooooooo much fun. The agenda included yummy food, a Christmas craft, a bit of singing, a couple of sappy movies, a lot of talk and laughter, a mini book club, some family history, and soy emergency candles. Soy emergency candles, you ask? Why, yes! Delys found a great "how to" website, and we thought we would give them a try.

I will include the link to the original site at the end of this post, but just to show you how easy it is, we will walk you through the process.

You will need soy wax, candle wicks, heavy duty glass jars (pint size or smaller), a glue gun and glue, a #10 size can, and a roll of masking or painter's tape.



I purchased the soy wax and wicks from Amazon. They were much cheaper online than at any of the local craft stores I checked--even factoring in coupons. We used a variety of jars. I already had some small canning jars and purchased others from a thrift store for 25 cents a piece. We also used some empty salsa and pesto jars that I had saved. The key is making sure that they are thick enough to withstand high heat, first when the hot wax is poured into them and then later when the candle is burning.

To make a pouring spout in our large can, we simply put it on the floor and stepped on it gently near the open end. It wasn't elegant, but it worked :) We filled a large pot about half full of water and then, using an old measuring cup, we scooped the wax flakes into the can. When we placed the can in the water, it tried to float. so we wedged a jar between the side of the pot and the can to hold it in place. We set the stove at medium high heat.


While the wax melted on the stove, we used the glue gun to anchor the wicks by placing a dab of hot glue on the metal bottom of each wick and then sticking it quickly to the inside bottom of each jar.


When the wax was ready, we carefully filled each jar, leaving about 1/2 inch of room at the top of the jar. (Be sure to use hot pads; the can is hot.) To hold the wick upright while the wax cooled and set, we tore a strip of masking tape long enough to go across the top of the jar, taped it in place, made a small slit in the tape where the wick should go, and then threaded the wick through it.


Once the wax was cool and hard, we removed the tape and trimmed the wicks. We put lids back on the jars to keep the candles clean until they are needed. The website we used said that candles made in 1/2 pint size jars should burn for up to 50 hours. We didn't test that, but we did light one of ours and loved the fact that it burned clean--no odor or noticeable smoke.


Kind of a nice thing to have around on a dark night when the lights go out. . . .

Here is the link to our inspiration site: http://happymoneysaver.com/happy-homesteading-making-50-hour-soy-survival-candles/

No comments :

Post a Comment